KEDU DX7-2 EC Signal Switch (Trigger Switch) is suitable for Li-battery power tools, such as impact wrenches ,pistol drills, circular saws, electric drills, reciprocating saws, used for Power Drill Trigger Switch, Electric Drill Trigger Switch, Cordless Drill Trigger Switch etc.
.Step or linear sliding resistor outputs speed adjusting signal
.Parallel diode on main switch (optional)
.Forward and backward reversing switch (electronic)
.Withstand 400A surge current in the voltage 21-36V, and the
number of operating cycles is 10E4
.Withstand 100A stall current at interval of each 40S, lasting 2.5S,
and the number of operating cycles is 1E4
.Can be used in a loop below 21V 40A, and the number of
operating cycles is 5E4
.Degree of protection: IP50